Sweater Weather {Made By Jacks Mum Hot Coffee Top}

webDSC_7866

webDSC_7879

Pattern: MBJM Hot Coffee Top

Fabric: Mostly from Spotlight, although it doesn’t seem to be on their website.

webDSC_7869webDSC_7953

Except we say jumper, not sweater. Although more accurately, these would be hoodies. And I know this is mostly kid sewing, so sorry. Here’s the thing though, finding patterns for older boys is hard. Much like shopping for clothes for them. Seriously, look at the boys sizes 10-16 in a shop some time, they have about three racks worth and the girls equivalent is at least triple that.

webDSC_7904webDSC_7877

Luckily, these two still want me to sew for them. And when I saw this french terry in Spotlight, I couldn’t resist it. It ticked all the boxes – print not too young, suitably modern and really lovely quality. The right side is almost like a heavy cotton lycra, with a lovely soft brushed fleece underside. The grey ribbing is also from Spotlight, the grey fleece is the wrong side of another sweater knit off cut and the olive and white striped fabric is cotton lycra picked up from The Remnant Warehouse.

webDSC_7942webDSC_7917

As for the pattern itself, there is an adult version (used here) and a kids version (Hot Chocolate). I bought the adult sized one for myself and was pretty happy to see the boys would fit into the XXS from the adult version, which is about a size 12 in the kids. I even broke my ‘no PDFs if there’s no A0’ rule and bought it. The sticky tape fest wasn’t too harrowing for this one.

webDSC_7965webDSC_8140webDSC_8171

The pattern has the option of a hood, a round neck or a cowl neck and can be made with or without the kanga pocket. I chose to leave the bottom band off these as I don’t love the look. Both boys could do with a little bit more length to combat that next time.

webDSC_7900webDSC_7901

I even made a basic round neck version for myself, which happens to be my second version but the first is a special collaboration and is under wraps for a while yet.

webDSC_8079

My measurements put me into the XL, but I sized up to the 3XL because I wanted something quite oversized and the fleece didn’t have as much stretch as the pattern asked for. The ribbing however, had too much stretch. I ended up cutting off the cuffs and making them smaller. I really should have done it for the neckline too but I didn’t have quite enough ribbing left. It’s still very wearable and one of the softest jumpers I own.

webDSC_8088webDSC_8024

Sorry for the photo overload, it was just such a magic afternoon down at the beach. I should really shoot down there more often.

webDSC_8168

 

Advertisements

That 70s Dress With The Shoulder Ties {Style 2667}

webDSC_0450

The other day I ran an Instagram poll to decide which dress I should sew next.

Style 2079

webDSCF5014

or Style 2667.

webDSC_0490

How good are Style patterns? I’ve made a few now, love them. They seem to have gone the way of the dodo, which is a shame.

webDSC_0482

Anyway, Style 2667 was the winner of the instagram poll. But I ignored that and cut out both anyway. I made 2079 first and then whipped up 2667 yesterday. It was a super fast sew. Just front and back bodices pieces, front and back facing pieces and the skirt pieces. I ended up using plain circle skirt pieces though because the ones included in the pattern have gathers too and I really didn’t have enough fabric for all that frou frou.

webDSC_0425

It didn’t fit as well straight out of the envelope as 2079, but I will forgive it. The bust darts are suuuuuuper long (you can see that in the pattern illustration) but the bodice was also too long for me. Which meant tying the straps up higher on my shoulders – in turn raising those bust darts way up over my boobs. So I managed to drop them about 1.5 inches (the darts, not the boobs). That will do for now, although it’s giving me some weird armscye issues. Nevermind, fixable for next time.

webDSC_0468

And still wearable. I think as time goes on, I just get more and more fussy about fit issues that wouldn’t have even blipped on my radar in the past.Β  A while ago I was picking apart fit problems on something I’d made and someone commented to me that it’s something we’d accept in RTW and she was right. We are far harder on our own sews than something we’d pick up in a shop.

webDSC_0433

So I’m happy. Pretty dresses and full skirts make me feel good. French bulldog printed fabric also pleases me. This one is designed by Christopher Thompson for Riley Blake and I bought it here. The facings and pockets are just plain pink lawn.

webDSC_0423

Ed snagged a shirt out of it too (it’s a Tadah Troop Shirt). He calls it his Sid Shirt.

webDSC_7214

Sid doesn’t really approve, but then he doesn’t approve of much these days.

webDSC_0441

 

Don’t Say It {Jalie 3242 + Ohhh Lulu Romy Bra + Megan Nielsen Rowan Bodysuit}

webDSC_6064

I hate the term ‘mummy and me’. It makes me shudder. There, I said it. I don’t hate the idea, just the cutesy term. Blergh. I prefer to call this ‘being economical with fabric’. I managed to get these two out of less than a yard, which was a surprise. I was sure it would have taken more.

webDSC_6051

Yes, I made the same pair of swimmers as yesterday (this time sans zip and with the addition of foam cups). So I’m not going to talk about them again. You can check here if you missed yesterday’s post.

webDSC_6049

Apparently he’s not embarrassed by me or handmade clothes. Yet.

webDSC_6041

It’s still raining. Our feet are webbed and check out what it’s doing to my hair. At least everyone has water again and the garden is happy.

webDSC_6069

 

 

Mashing It Up {Jalie 3242, Megan Nielsen Rowan and Ohhh Lulu Romy}.

webDSC_6003

I’ve mentioned before how I’m happiest when submerged, like some kind of sunglasses-wearing dugong. As a family we spend a lot of time in the water. Kids have a habit of growing too, so I knew I needed to replace last year’s swimmers. Locally, there wasn’t a lot of lycra available that the boys would like, so I was browsing Spoonflower and pretty soon I had a cartful of their sport lycra. Ahem. Including those amazing Andrea Lauren moths for myself. You might have noticed I have a thing for moths. I have one tattooed on my arm and there’s a moth in my KMAD logo. It stems from a love of Silence of the Lambs, which I realise is creepy. I read the book when I was about 12 years old and have just loved that moth image ever since. I really like the old biology illustrations too, which is what the print reminded me of.

webDSC_6008

The two little guys and the big guy got theirs made from Jalie 3242. Yes, it’s an underwear pattern, no I don’t care. They generally just wear them underneath boardies anyway, so it’s not like they are flashing them all over the beach. Though they could if they wanted to really. Look how cool those prints are! I must add, that when my husband tried his on, he pretended to announce his swim race for the olympics over a megaphone and ran around the house shaking his arms and legs about for a bit. Warming up for his pretend swim.

For theirs I replaced the underwear elastic band with a fabric band. Easy.

Bits for mine:
Sport Lycra from Spoonflower
Lining from The Remnant Warehouse
Chunky zip from East Coast Fabric
Elastic from Pitt Trading
Yellow rings and sliders harvested from an old pair of swimmers.

webDSC_6007

I was keen to make a one piece for myself. My old favourite is getting a bit saggy and the Ohhh Lulu Cindy I made for myself a while back is too big now. I’m joining to local pool so will be doing a bit of lap swimming and figured a well fitting one piece is a good idea. I wanted to see if I could create a slightly different style using two of my faves – Megan Nielsen’s Rowan bodysuit and Ohhh Lulu’s Romy bra. Here’s a refresher on what they look like:

webDSC_4385-2webDSC_0612

I love how the bottom half of the bodysuit fits and Romy provides decent shaping and coverage without wire. I pulled out my pattern pieces, marked off where I wanted the bodysuit to end (by comparing it to my favourite black one piece) and lined up the Romy on top to see how they’d fit together. It was pretty much perfect. I took some width out of the Romy back piece and straightened it out, but that was it.

webDSC_6004

I added the zip because I assumed I would need it to get the swimmers on and off (turns out I don’t, but nevermind). It was by far the most painful part of the whole process, but not as difficult as last time. I had to shorten it and add a tab to the end again, then I basted that sucker in by hand first and that definitely helped. Actually, I basted heaps with these (leg holes, bodice top edge, bra pieces, raw edges where the zip goes) – it really helps when you have to sew the binding etc on and you’re not struggling to keep multiple layers together.

webDSC_6005

For the first time ever, I made my own straps using this tutorial and my own binding using this one. I prefer wider straps than RTW offers on most of their swimmers, so turning these wasn’t hard at all. Making my own straps and finishing with binding always seemed so scary in the past, I have no idea why. I’d always just finish necklines with elastic and legs with bands (or elastic). Probably because I started sewing lingerie before swimmers and that’s just what I knew. Anyway, the binding finish isn’t as neat as RTW and I know zig zag looks super ‘homemade’ but it’s not really obvious unless you’re too close.

webDSC_6035

I’m really happy with the fit and I don’t think there’s anything I would change. I might try adding foam cups next time for a bit of extra lift, but it’s honestly fine without them. And adding the cups means I’d lose the enclosed seams of the bra lining because of the way the cup is split into two. I’d have to stitch them to the lining so they don’t move around and drive me nuts.

webDSC_6030

webDSC_6034

We’ve just had about 6 months of rain over 4 days, so I’m not really sure why I’ve been sewing swimmers, but I’m glad they are all done. Bring on the beach! Bring on the pool! Bring on our trip to Samoa!

webDSC_6038

 

 

Something For The Small Ones {Made Everyday Shorts}

I was creeping around Spotlight recently (as you do) and made quite the discovery. Microfibre quick dry. That’s code for boardies fabric. If you’ve tried to make board shorts before, you would have discovered that the fabric is pretty hard to find. So of course I bought a couple of metres so I could make shorts for the boys.

webDSC_5024

Problem was, I no longer have a shorts pattern to fit them. Kids (boys especially) are particularly hard to find patterns for once they get beyond about a size 8. Actually, even RTW is hard to buy for boys after that age too. Apparently they don’t need clothes.

webDSC_5032-2

ANYWAY. Someone had posted the Made Everyday shorts in one of the FB sewing groups I’m in (yes I’m that cool) and I was pretty chuffed to see they went up to a size 10 and had heaps of pattern variations. I made the racer style. Love that curved hem.

webDSC_5015

In the past, I would have shuddered at the thought of making all that bias tape, but that has changed recently since I’ve discovered double fold. It doesn’t seem to be as common as single fold, but damn it’s so much easier to work with. I didn’t even mind making my own. I cut my strips 7cm wide, sewed them together at the ends to form a long strips, ironed them in half length ways, opened that up and then folded them in to meet in the middle. Then folded in half length ways again. Hard to describe, very simple to do. I have some of those little triangular bias tape makers but I honestly find this method easier. Weirdly soothing.

webDSC_5016

That bias tape runs around the hems and outside of the shorts making them look quite neat and professional. Both boys are the same size in the waist, so I only had to trace off the size 10. Which I may have traced directly off my computer monitor as soon as buying because printing is such a chore. Ha. There’s only two pieces so it’s not hard. They are definitely getting more of these.

webDSC_5035-2

 

Harry Potter and the Philosopher’s Swimming Jocks {Jalie 3242}.

In our house, there are shirts and swimming shirts, shorts and swimming shorts and of course, jocks and swimming jocks. Because when your youngest has a severe speech delay, communicating is done in the easiest, simplest way and sometimes those words stick. Swimming jocks are here to stay. At least 9 months of the year, we are around some body of water or another – be it river, ocean or pool, so the differentiation between regular jocks and swimming jocks becomes important. No one wants to hang out in damp jersey.

blogDSC_7902

OLYMPUS DIGITAL CAMERA

OLYMPUS DIGITAL CAMERA

Jalie 3242 is a pretty kick arse pattern. It has a variety of styles for the whole family on the one pattern. Perfect. I’ve made the knickers for me, the briefs for the men of the house but by far the favourite are the boys’ trunks. They are such a quick sew, the only elastic is the waistband and there is no butt seam – that has to be comfy, right? Regardless, they are loved. I’m sure in a few years homemade jocks will be unacceptable, but for now they’re awesome.

Last summer, I decided the Jalie trunks would be alright as swimmers. And if they looked too much like underwear, the boys could just wear them under boardshorts (aka swimming shorts), so no biggy. I grabbed the only spandex I had at the time, which was sourced from a local Op Shop so I had no idea if it was even chlorine resistant. But I figured we are barely in chlorine anyway (our pool is salt) and it wasn’t a big deal if they fell apart. So I made these cool little red and white striped trunks for the boys and they wore them all summer and they held up really well. They are still tucked away in a drawer actually, although they’ve probably grown out of them by now. So I decided to make more for this summer, but this time I decided to do it all proper like and bought Sports Lycra from Spoonflower in the coolest ever Harry Potter print. I also bought legit swim elastic. Today I dragged out my old faithful Jalie pattern and had those suckers made within an hour. So satisfying.

webDSC_1502webDSC_1504

There’s only one piece for the body of the trunks and four little pouch pieces. It’s a bit of a different sew, and this tutorial is the bees knees because to be honest, the Jalie instructions are a little lacking. But once you’ve done that bit, it’s all really straight forward.

webDSC_1505webDSC_1506

The pattern uses an exposed elastic waistband, which obviously isn’t ideal for swimmers, so I just added a bit more height to the pattern to compensate for the folding of the waist with swim elastic. I finished the raw edges, marked the elastic and waist of the trunks at quarters and attached with a zig zag stitch. Then folded it over and zig zagged again.

webDSC_1507webDSC_1508webDSC_1510webDSC_1511

webDSC_1512

webDSC_1517webDSC_1523