Mashing It Up {Jalie 3242, Megan Nielsen Rowan and Ohhh Lulu Romy}.

webDSC_6003

I’ve mentioned before how I’m happiest when submerged, like some kind of sunglasses-wearing dugong. As a family we spend a lot of time in the water. Kids have a habit of growing too, so I knew I needed to replace last year’s swimmers. Locally, there wasn’t a lot of lycra available that the boys would like, so I was browsing Spoonflower and pretty soon I had a cartful of their sport lycra. Ahem. Including those amazing Andrea Lauren moths for myself. You might have noticed I have a thing for moths. I have one tattooed on my arm and there’s a moth in my KMAD logo. It stems from a love of Silence of the Lambs, which I realise is creepy. I read the book when I was about 12 years old and have just loved that moth image ever since. I really like the old biology illustrations too, which is what the print reminded me of.

webDSC_6008

The two little guys and the big guy got theirs made from Jalie 3242. Yes, it’s an underwear pattern, no I don’t care. They generally just wear them underneath boardies anyway, so it’s not like they are flashing them all over the beach. Though they could if they wanted to really. Look how cool those prints are! I must add, that when my husband tried his on, he pretended to announce his swim race for the olympics over a megaphone and ran around the house shaking his arms and legs about for a bit. Warming up for his pretend swim.

For theirs I replaced the underwear elastic band with a fabric band. Easy.

Bits for mine:
Sport Lycra from Spoonflower
Lining from The Remnant Warehouse
Chunky zip from East Coast Fabric
Elastic from Pitt Trading
Yellow rings and sliders harvested from an old pair of swimmers.

webDSC_6007

I was keen to make a one piece for myself. My old favourite is getting a bit saggy and the Ohhh Lulu Cindy I made for myself a while back is too big now. I’m joining to local pool so will be doing a bit of lap swimming and figured a well fitting one piece is a good idea. I wanted to see if I could create a slightly different style using two of my faves – Megan Nielsen’s Rowan bodysuit and Ohhh Lulu’s Romy bra. Here’s a refresher on what they look like:

webDSC_4385-2webDSC_0612

I love how the bottom half of the bodysuit fits and Romy provides decent shaping and coverage without wire. I pulled out my pattern pieces, marked off where I wanted the bodysuit to end (by comparing it to my favourite black one piece) and lined up the Romy on top to see how they’d fit together. It was pretty much perfect. I took some width out of the Romy back piece and straightened it out, but that was it.

webDSC_6004

I added the zip because I assumed I would need it to get the swimmers on and off (turns out I don’t, but nevermind). It was by far the most painful part of the whole process, but not as difficult as last time. I had to shorten it and add a tab to the end again, then I basted that sucker in by hand first and that definitely helped. Actually, I basted heaps with these (leg holes, bodice top edge, bra pieces, raw edges where the zip goes) – it really helps when you have to sew the binding etc on and you’re not struggling to keep multiple layers together.

webDSC_6005

For the first time ever, I made my own straps using this tutorial and my own binding using this one. I prefer wider straps than RTW offers on most of their swimmers, so turning these wasn’t hard at all. Making my own straps and finishing with binding always seemed so scary in the past, I have no idea why. I’d always just finish necklines with elastic and legs with bands (or elastic). Probably because I started sewing lingerie before swimmers and that’s just what I knew. Anyway, the binding finish isn’t as neat as RTW and I know zig zag looks super ‘homemade’ but it’s not really obvious unless you’re too close.

webDSC_6035

I’m really happy with the fit and I don’t think there’s anything I would change. I might try adding foam cups next time for a bit of extra lift, but it’s honestly fine without them. And adding the cups means I’d lose the enclosed seams of the bra lining because of the way the cup is split into two. I’d have to stitch them to the lining so they don’t move around and drive me nuts.

webDSC_6030

webDSC_6034

We’ve just had about 6 months of rain over 4 days, so I’m not really sure why I’ve been sewing swimmers, but I’m glad they are all done. Bring on the beach! Bring on the pool! Bring on our trip to Samoa!

webDSC_6038

 

 

Holiday Wardrobe Preparation {Megan Nielsen Flint and Rowan}

webDSC_4699

Ah, Flint and Rowan. They go together like peas and carrots, don’t they? I’ve made both before – Flint pants here and Flint shorts here. Rowan was more recent and a stretched a bit further than the original pattern into a swimsuit.

webDSC_4702

I love my past Flints but unfortunately they’re a bit big now. And an upcoming holiday is the perfect reason to sew another pair right? This time from sweet drapey tencel that I picked up at Spotlight. The Rowan body suit is lovely soft Timeless Treasure cotton jersey from fabric.com.

webDSC_4704

I went for the tie version on the Flints and couldn’t help but to brighten the inside a touch with a vintage fabric covered button (I pick these up  from op shops, but they are often just singles, which is perfect for this use) and some rayon off cuts. The rayon is the right weight for lining the tencel. I think quilting cotton would have been too heavy.

webDSC_4706

The closure on the Flints is pretty magic. It does your head in a little bit while you’re sewing them, but the instructions are really great and you just have to trust the process. There isn’t a zip, you just get into these bad boys by opening the pocket. Superb.

webDSC_4708

The Rowan bodysuit has nice details at the closure too. There’s not a fancy way to say it, but at the crotch. But who doesn’t love a fancy crotch? The facing pieces can be cut from just about anything. I used some soft lawn scraps I had. It’s a nice detail. Oh and I used those old metal snaps because I don’t have a snap press, which would obviously look much more professional. Still, they do the job and I can’t feel them at all when I’m wearing it.

webDSC_4777

So size wise the Rowan is perfect (straight large) but the Flints aren’t. To be honest, my body has changed a fair bit over the past few months and I’m still getting used to it. It seems it doesn’t matter if it’s weight loss or gain – it can still feel like your body isn’t quite yours when it changes. I made the straight medium in the Flints because I went by my waist measurement. I thought there would be enough ease in the hips and thighs but I really should have graded out to the large. My waist seems to be about a size different to the rest of me at the moment and I’m not really used to my new proportions yet.

webDSC_4727

They’re not as swingy as I’d like, but they’re still wearable. And who knows, my hips could catch up to my waist eventually. One can only hope. But even if they don’t, that’s fine too.

webDSC_4744

I know there’s a few sewists who’ve eliminated those front pleats, but I actually quite like them. They bring out my inner 80s mum chic.

webDSC_4757

 

 

 

First Swim of the Season {Megan Nielsen Rowan}

webDSCF5747

It gets hot here. We spend a lot of time in the water from about September through to May. And even though we wear sunscreen and hats, as well as staying out of the sun between 10am and 3pm, sometimes that’s just not enough.

OLYMPUS DIGITAL CAMERA

So we wear rashies (I think they’re called rash guards in the US). They’re easy enough to buy for the kids but generally they are falling apart after one season. Not a big deal really because they’ve grown out of them anyway. But there’s not a lot of variety available for women. Maybe there’s not a huge market for them. They’re not exactly the height of beach fashion. But still, skin cancer is worse.

web-2020

So mine is a couple of seasons old and is looking worse for wear. All stretched out and baggy. They don’t seem to be made out of quality fabric anymore. Time for an upgrade. I quite like the all in one situations, like a one piece with sleeves, but I’m yet to find one that’s the right shape for me. They all seem to have what I like to call ‘Baywatch Butt’, you know – that really high cut skimpy back? Which is fine, but not all that practical when I’m in the water photographing clients, because I do that occasionally. I want to make sure I can tackle the surf without getting distracted by a wedgie.

webDSC_4363-2

Enter Megan Nielsen’s Rowan. Oh yes. Yeah, I know it’s not a swimsuit pattern, but since when have I followed the rules? My tropical print spandex and swim elastic is from Pitt Trading and the spandex I used for the lining (which isn’t really lining) as well as the plain black is from The Remnant Warehouse. Both these stores are superb sources of swimmy stuff in Australia.

webDSC_4355-2

My original plan was to make a top from the Rowan pattern first, but that all went out the window when today decided to reach 31 degrees. DEFINITELY TIME TO START ON THE SWIMMERS. Risky really, but it all turned out pretty ok in the end. I’ve taken some work in progress shots this time, because the construction is a bit different to the normal bodysuit as it has to be fully lined, a zipper added and no crotch snaps. As mentioned above, my lining isn’t really lining, but spandex because I didn’t have enough black swim lining left. Both have a really similar amount of stretch so it works quite well and feels more supportive.

webDSC_4356-2

I pretty much made two of the bodysuits and then basted everything wrong sides together, which gives a pretty clean finish on the inside. The front is cut for the zipper (otherwise you wouldn’t be able to get into it, obviously). I attached the neckband while it was still open rather than stitching it into a loop first, so the zipper had somewhere to go. I overlocked the raw edges. Not that they need it – the spandex won’t fray. I just find it easier to work with.

webDSC_4359-2

I could only get open end plastic zips, so I put a tack across it by hand and literally smashed off the end teeth with a hammer. Satisfying and effective. Then I added a bit of spandex across the end for comfort. Not my prettiest effort but no biggy.

webDSC_4357-2

webDSC_4358

And you know, I knew inserting this zip would be the biggest challenge of the entire thing. I went in all zen, even used interfacing on the edge of the swimmers because I totally knew that spandex would want to pucker and go wavy and be a bastard. It still did anyway. Probably not as much as it would have without stabilising the edges. But it was still a bugger and took longer than the rest of the construction put together. The end of it looked so horrendous that I ended up covering it with a little tab of fabric. Which in the end wasn’t the worst idea because I think it adds a bit of strength to a weak point.

webDSC_4362-2

The sleeves couldn’t go in flat (as per the instructions) because the side seams were already done, so they just went in the normal way. In the round? Set in? You know what I mean. Easy enough. Although make sure your overlocker doesn’t want to inhale everything around the sleeves. Mine does. I won this time though, I was bloody careful. Then elastic for the legs and you’re golden. I don’t love elastic in swimmers done this way. I prefer the look of bands. But that’s just nitpicking and also because I have delightfully thunderous thighs that elastic tends to cut into.

webDSC_4372

And she is done! It just occurred to me that I should have framed these better and actually got some water in the shot. So you’ll just have to believe that I am standing on the edge of the pool.

webDSC_4376

My absolute favoutire part of this pattern is the butt coverage. It’s perfect for my shape (which is mostly pancake butt). I find that most underwear patterns bag out between the back of my hip and leg and I usually have to take a dart out of the pattern piece. But not these babies! Nice and secure. I love the fit so much I think I might use it to draft some more knickers.

webDSC_4385-2

Fit wise, they are a smidge too small. I’m getting a bit of pulling at the zipper. My measurements put me between the M and the L. I made the M because I didn’t want to risk them being too big. I have converted underwear patterns into swimmers before and while the fit is ok when they’re dry, they get baggy and want to wash away once they hit the surf. This one is snugggggg and not going anywhere. If I wasn’t being lazy, I would have added a bit extra to allow for the zip because it’s seam allowance that the original pattern doesn’t have built in. I’ll definitely do that next time.

webDSC_4395

So the thing about using orange lining is that when you actually get wet, it will show through. But you know what? Nothing else shows through, so that’s a win. And there is my first official dip of the season. There will be more – Rowans and swims.

 

 

 

Say Mesh to the Dress {Megan Nielsen Sudley Dress}

webDSC_7910

I had a function to go to on Friday night. On Thursday I found out it was cocktail, rather than casual. Incidentally, when I was in Brisbane last weekend, I spotted (LOL) a pretty lady wearing a gorgeous polka dot mesh dress. I was going to be a creeper and ask where she got it, but I figured it was something I could probably make myself. I’ve seen a number of mesh RTW dresses around lately (without a lining) and I love the look.

webDSC_7952

Then the remnant table at Spotlight provided, in the form of $8/m. Challenge accepted. So on Thursday when I found out I needed a dressier dress, I wracked my brain to think of a pattern I could use. I wanted a floaty, relaxed fit – that way I wouldn’t have to bother with a zip in fine fabric. I wanted those McCalls 7542 sleeves again because FASHUN. And then it hit me, my darling Sudley. I have made it many times before, but usually it’s a summery, beachy choice. Not today, Sudley. Today we are going AFTER DARK. And we did.

The first thing I did was replace my needle with a sparkly fresh fine sharp one.

webDSC_7893

First hurdle: I should do french seams because they are visible through the dress. Did I have time for french seams? Not really. So I just ended up using my overlocker. Quick and neat. Not as neat as french seams, but to be honest it’s not super noticeable.

webDSC_7897

Second hurdle: Neck closure. Megan suggests ties or a hook and eye. I wasn’t thrilled about either for this dress. Ties seemed to casual and I thought I could do better than hook and eye. Instead I used a black fabric covered button from my stash and fine black elastic for the loop. Looks cool, not that you can see it. Sorry.

Third Hurdle: That collar. This one caused me the biggest brain strain. Usually, you’d use iron on interfacing to give the collar a bit of structure, but that can’t happen in this case because you’d see it through the mesh. I turned to my FB sewing group for this one and a clever lady suggested organza, which is brilliant – light but still structured. That led me to remember the black bra lining in my stash, which is a lot like organza, it’s very light but very strong as it has to prevent stretch in bra cups and bridges. Perfect. It worked really well. For consistency I used the overlocker for the collar pieces too.

webDSC_7895

Fourth Hurdle: Not really a hurdle, but I wasn’t keen on attempting my first rolled hem and I knew a standard hem wouldn’t look right, so I used black bias binding to finish the dress and sleeve hems. I also used it in place of the facing on the neckline and keyhole.

webDSC_7951

All that I needed was a slinky black slip (not made by me), shoes and a clutch and I was event ready, baby. Oh and you know, hair and make up and all that stuff.

Will definitely wear this one again.

webDSC_7917

 

Fancy Pants {Megan Nielsen Flint Pants}

webDSC_6919

So after making the shorts version of these pants as a practice run to test fit (and realising that I actually loved them), I got around to grabbing some black rayon and making the pants version.

Yes black is a nightmare to photograph and I’m sorry.

This time I made the tie version, using a black and white cotton printed with birds for the pocket lining and tie contrast. There’s also a little button inside the waistband to make everything more secure (which I accidentally sewed a bit close to the edge. Oops).

webDSC_6922

In hindsight, the rayon I used might be a bit too light. They are slightly transparent in the light. Also the band tends to fold over on itself when I sit. Still wearable though. These ended up being full length instead of the 3/4 they are supposed to be, because I’m short. I only did a narrow hem to keep them full length.

webDSC_6933

There’s not much else to say really! They’ll be great for work – it’s always a bit tough to dress for photography work. You need to be relatively dressy, but still have room to squat and move without flashing anyone. It’s a fine line.

I love them, they fit well, they sew up really quickly and I already have plans for my next pair. I’m thinking the 3/4 length in something quite structured, like sateen. Maybe even wool, if I can find the right one. Totally impractical for our climate, but they’d be awesome anyway.

webDSC_6964

 

Shorts Denial {Megan Nielsen Flint Shorts}

webDSC_6318

Here’s the thing about shorts. I don’t wear them. At least since I’ve had kids anyway. My thighs are something I’ve always felt compelled to disguise, so shorts have been off the menu. However, when I saw Megan’s Flint pattern for the first time, I knew I had to have it. The shorts didn’t blip on my radar, but those pants, holy hell – I needed those pants on my body STAT.

webDSC_6413

So when my pattern arrived yesterday from the lovely Stitch 56, I opened it to have a look and decided that I’d trace it out then and there, but buy some fabric for the pants when I had a chance. Except then I got a bit nervous. I’d not really made pants before (only Megan’s Tania culottes) and even though I rarely make toiles, I figured it was probably a good idea for these – especially since the pants require about 3 metres of fabric and I didn’t want to waste that. So off I toddled to my sewing room and went over my stash, looking for enough fabric suitable for a toile. I remembered I had this big denim off cut picked up from our local op shop last week. Weird for me, since I don’t really sew with denim, but it was cheap and heavy duty and I figured it would come in handy for something. Not enough for pants, but hey – I could make shorts right? This was just for fitting purposes, I don’t actually have to wear them, do I?

webDSC_6321

Except yes I do have to wear them because they’re bloody awesome! Waaaaaaahhhhhh! They fit my fat thighs, with room! They have fun pocket lining! They have cute buttons! They wrap in the coolest way! The fit is pretty great too. I don’t need to change anything. Although a bonus of my measurements (42/34/44) is that I fit exactly into a lot of patterns without any changes. In MN patterns I’m an XL.

webDSC_6384

(I took my pics in my sewing room because there’s the remnants of a tropical cyclone raging outside. School has been cancelled, husband is supposed to be home from work. It’s quite a day. Sewing room was the only place that had a sliver of light. Sorry that they’re a bit crap. And yeah, I could have waited for pics but I’m wearing them today, sooooo….).

I used a scrap of anchor chambray for the pocket lining, because of course nautical. I even used little silver anchor buttons that I’d been hoarding forever on the waistband. Because nautical. But then, they didn’t look quite right. Maybe a bit toooo yacht club. So I changed them for little bunny and moon fabric covered ones instead. Also from an op shop. Fabric is Luna Sol.

webDSC_6414

Which brings the total cost of these shorts to approximately $6.50. That’s without my labor costs, obviously – but let’s conveniently ignore that. Jokes aside, they only took me just over an hour and a half to sew, which isn’t bad.

webDSC_6320

So besides going together really well, feeling somewhat high end and generally just being really cool, you know what else I love about Megan’s patterns? (and I know this is a soppy love fest, but I swear I’m not being paid and I paid for my own patterns, I just really like her stuff) – there’s always suggestions in the instructions for tweaks to make them your own. One of the suggestions was to add buttons to the other side of the waistband too. So I did. Now I have cool shorts. Pant to come when I find something suitably swishy and drapey and delightful.

webDSC_6393

Save