Holiday Wardrobe Preparation {Megan Nielsen Flint and Rowan}

webDSC_4699

Ah, Flint and Rowan. They go together like peas and carrots, don’t they? I’ve made both before – Flint pants here and Flint shorts here. Rowan was more recent and a stretched a bit further than the original pattern into a swimsuit.

webDSC_4702

I love my past Flints but unfortunately they’re a bit big now. And an upcoming holiday is the perfect reason to sew another pair right? This time from sweet drapey tencel that I picked up at Spotlight. The Rowan body suit is lovely soft Timeless Treasure cotton jersey from fabric.com.

webDSC_4704

I went for the tie version on the Flints and couldn’t help but to brighten the inside a touch with a vintage fabric covered button (I pick these up  from op shops, but they are often just singles, which is perfect for this use) and some rayon off cuts. The rayon is the right weight for lining the tencel. I think quilting cotton would have been too heavy.

webDSC_4706

The closure on the Flints is pretty magic. It does your head in a little bit while you’re sewing them, but the instructions are really great and you just have to trust the process. There isn’t a zip, you just get into these bad boys by opening the pocket. Superb.

webDSC_4708

The Rowan bodysuit has nice details at the closure too. There’s not a fancy way to say it, but at the crotch. But who doesn’t love a fancy crotch? The facing pieces can be cut from just about anything. I used some soft lawn scraps I had. It’s a nice detail. Oh and I used those old metal snaps because I don’t have a snap press, which would obviously look much more professional. Still, they do the job and I can’t feel them at all when I’m wearing it.

webDSC_4777

So size wise the Rowan is perfect (straight large) but the Flints aren’t. To be honest, my body has changed a fair bit over the past few months and I’m still getting used to it. It seems it doesn’t matter if it’s weight loss or gain – it can still feel like your body isn’t quite yours when it changes. I made the straight medium in the Flints because I went by my waist measurement. I thought there would be enough ease in the hips and thighs but I really should have graded out to the large. My waist seems to be about a size different to the rest of me at the moment and I’m not really used to my new proportions yet.

webDSC_4727

They’re not as swingy as I’d like, but they’re still wearable. And who knows, my hips could catch up to my waist eventually. One can only hope. But even if they don’t, that’s fine too.

webDSC_4744

I know there’s a few sewists who’ve eliminated those front pleats, but I actually quite like them. They bring out my inner 80s mum chic.

webDSC_4757

 

 

 

Advertisements

First Swim of the Season {Megan Nielsen Rowan}

webDSCF5747

It gets hot here. We spend a lot of time in the water from about September through to May. And even though we wear sunscreen and hats, as well as staying out of the sun between 10am and 3pm, sometimes that’s just not enough.

OLYMPUS DIGITAL CAMERA

So we wear rashies (I think they’re called rash guards in the US). They’re easy enough to buy for the kids but generally they are falling apart after one season. Not a big deal really because they’ve grown out of them anyway. But there’s not a lot of variety available for women. Maybe there’s not a huge market for them. They’re not exactly the height of beach fashion. But still, skin cancer is worse.

web-2020

So mine is a couple of seasons old and is looking worse for wear. All stretched out and baggy. They don’t seem to be made out of quality fabric anymore. Time for an upgrade. I quite like the all in one situations, like a one piece with sleeves, but I’m yet to find one that’s the right shape for me. They all seem to have what I like to call ‘Baywatch Butt’, you know – that really high cut skimpy back? Which is fine, but not all that practical when I’m in the water photographing clients, because I do that occasionally. I want to make sure I can tackle the surf without getting distracted by a wedgie.

webDSC_4363-2

Enter Megan Nielsen’s Rowan. Oh yes. Yeah, I know it’s not a swimsuit pattern, but since when have I followed the rules? My tropical print spandex and swim elastic is from Pitt Trading and the spandex I used for the lining (which isn’t really lining) as well as the plain black is from The Remnant Warehouse. Both these stores are superb sources of swimmy stuff in Australia.

webDSC_4355-2

My original plan was to make a top from the Rowan pattern first, but that all went out the window when today decided to reach 31 degrees. DEFINITELY TIME TO START ON THE SWIMMERS. Risky really, but it all turned out pretty ok in the end. I’ve taken some work in progress shots this time, because the construction is a bit different to the normal bodysuit as it has to be fully lined, a zipper added and no crotch snaps. As mentioned above, my lining isn’t really lining, but spandex because I didn’t have enough black swim lining left. Both have a really similar amount of stretch so it works quite well and feels more supportive.

webDSC_4356-2

I pretty much made two of the bodysuits and then basted everything wrong sides together, which gives a pretty clean finish on the inside. The front is cut for the zipper (otherwise you wouldn’t be able to get into it, obviously). I attached the neckband while it was still open rather than stitching it into a loop first, so the zipper had somewhere to go. I overlocked the raw edges. Not that they need it – the spandex won’t fray. I just find it easier to work with.

webDSC_4359-2

I could only get open end plastic zips, so I put a tack across it by hand and literally smashed off the end teeth with a hammer. Satisfying and effective. Then I added a bit of spandex across the end for comfort. Not my prettiest effort but no biggy.

webDSC_4357-2

webDSC_4358

And you know, I knew inserting this zip would be the biggest challenge of the entire thing. I went in all zen, even used interfacing on the edge of the swimmers because I totally knew that spandex would want to pucker and go wavy and be a bastard. It still did anyway. Probably not as much as it would have without stabilising the edges. But it was still a bugger and took longer than the rest of the construction put together. The end of it looked so horrendous that I ended up covering it with a little tab of fabric. Which in the end wasn’t the worst idea because I think it adds a bit of strength to a weak point.

webDSC_4362-2

The sleeves couldn’t go in flat (as per the instructions) because the side seams were already done, so they just went in the normal way. In the round? Set in? You know what I mean. Easy enough. Although make sure your overlocker doesn’t want to inhale everything around the sleeves. Mine does. I won this time though, I was bloody careful. Then elastic for the legs and you’re golden. I don’t love elastic in swimmers done this way. I prefer the look of bands. But that’s just nitpicking and also because I have delightfully thunderous thighs that elastic tends to cut into.

webDSC_4372

And she is done! It just occurred to me that I should have framed these better and actually got some water in the shot. So you’ll just have to believe that I am standing on the edge of the pool.

webDSC_4376

My absolute favoutire part of this pattern is the butt coverage. It’s perfect for my shape (which is mostly pancake butt). I find that most underwear patterns bag out between the back of my hip and leg and I usually have to take a dart out of the pattern piece. But not these babies! Nice and secure. I love the fit so much I think I might use it to draft some more knickers.

webDSC_4385-2

Fit wise, they are a smidge too small. I’m getting a bit of pulling at the zipper. My measurements put me between the M and the L. I made the M because I didn’t want to risk them being too big. I have converted underwear patterns into swimmers before and while the fit is ok when they’re dry, they get baggy and want to wash away once they hit the surf. This one is snugggggg and not going anywhere. If I wasn’t being lazy, I would have added a bit extra to allow for the zip because it’s seam allowance that the original pattern doesn’t have built in. I’ll definitely do that next time.

webDSC_4395

So the thing about using orange lining is that when you actually get wet, it will show through. But you know what? Nothing else shows through, so that’s a win. And there is my first official dip of the season. There will be more – Rowans and swims.